Generally, the wire feeding wheel seat of multi axis spring machine is reasonably arranged on the wire feeding shell, and is composed of two or three groups of left and right wire feeding wheels. Today, oudiman technology will talk to you about the position of the wire feeding wheel seat of the multi axis spring machine? There are two key ways, everyone can choose their own way to carry out the adjustment work.

1、 The process of height adjustment of wire feeding wheel seat of multi axis spring machine is divided into:

1. Loosen the support rod, loosen the first two groups of wire feeding wheels with two straight hair splints, and then tighten the set screws to one group of wire feeding wheels;

2. Use an open-ended wrench to rotate each set of studs directly below the shell to adjust the height of the wire feed wheel seat (for example, when the wire feed wheel is rotated clockwise, the height of the wire feed wheel will increase; if the ship is transported in the opposite direction, the height of the wire feed wheel will be reduced);

3. After relevant adjustment, clamp the support rod and set screw.

2、 The process of leveling adjustment of wire feeding wheel seat of multi axis spring machine is divided into:

1. Loosen the pressure valve of wire feeding wheel;

2. Loosen the fixed anchor bolt of wire feeding wheel seat;

3. Adjust the leveling adjustment screw of the wire feeding wheel seat to make the wire feeding wheel seat to the suitable position;

4. Tighten the wire feeding wheel and fix the anchor bolt;

5. Tighten the wire feeding wheel pressure valve according to the required tightness.